
A short stack of DACs — from top, the NuForce uDAC-2SE, the FiiO E10, and the HRT HeadStreamer.


A short stack of DACs — from top, the NuForce uDAC-2SE, the FiiO E10, and the HRT HeadStreamer.
NuForce uDAC-2SE ($249, nuforce.com)
HRT HeadStreamer ($139, highresolutiontechnologies.com)
FiiO E10 ($80, fiio.com.cn)
A couple of weeks back we took a listen to a couple of DAC/headphone amplifier combo units from ADL and FiiO that did it all — covering your digital audio and headphone amplification needs at home and on the go — but you don't always need to do it all, do you? There are plenty of us who really just need better audio on the desktop. Luckily, you'll find that the market's rich these days with small, do-it-all USB devices meant to do just that — at surprisingly little cost.
We picked three likely candidates at a range of price points, from: FiiO's almost ridiculously inexpensive E10, though HRT's unique HeadStreamer, on up to the relatively luxurious Special Edition of NuForce's uDAC-2. On the face of things, these are rather similar little boxes; each takes only a USB input, and provides output primarily via a headphone jack alone (though the FiiO and NuForce units also include analog line and coaxial S/PDIF outputs for interfacing with your other audio hardware.
One thing you'll notice is that high-end DAC designs are making their way down to these bargain-basement price points. All three of these units will decode incoming audio data at bit depths up to 24, and sample rates of up to 96 kHz, so they should cover the vast majority of your high-resolution needs. Furthermore, the de rigueur USB transfer technique, asynchronous mode (in which a clock onboard the DAC is used to manage the timing of the data coming in over USB, rather than deriving the DAC's timing from the incoming data rate using a phase-locked loop as in standard adaptive USB audio hardware) is employed in both the HRT and NuForce units. Does that, in itself, matter? On paper, asynchronous mode offers theoretically better jitter performance, but plenty of well-regarded designs (including CEntrance's DACport and DACmini (which we have on hand for an upcoming review) provide very low jitter (and great sound) using adaptive transfer mode. So don't make your decision entirely on that spec.










Copyright © 2013 Bonnier Corp. All rights reserved. Reproduction in whole or in part without permission is prohibited.

Is the iPad problem you observed with the FiiO and HeadStreamer related to insufficient power and resolved by a USB battery power supply such as the Tekkeon TekCharge MP1550 used in your article from 12/8/11, or did these devices fail even with extra power?
@chemrat,
Apologies if that wasn't clear. Unfortunately, they are both unrecognized or rejected by the iPad even with an inline power supply — I had high hopes, but of these three I could only get the NuForce unit to work. This is on an iPad2 with the most recent iOS updates.
@MBerk,
Thanks for the clarification. Audio and computer/tablet issues are getting complex (again, I suppose), and it isn't easy, or at least convenient, to audition multiple options, especially when internet purchasing is so predominant and local dealers are disappearing or already long gone. True high end auditions are still possible locally, but I never could afford that category of product anyway, and there isn't much profit margin for brick & mortar dealers selling budget high end items. I'm using Vortexbox and Logitech Media Server (LMS) on a Linux appliance for FLAC files, playing either via VLink/PS Audio Digital Link III in my living room or a Squeezebox Touch/receiver setup in my bedroom. Though I have a large iTunes library, mostly Apple Lossless and accessible wirelessly at home, I don't really use much anymore. An iPad that I need for work is about to enter the mix..., I currently use my Android phone and a laptop or desktop pc to control the LMS. Even without the iPad, I face more OS options than I can stay on top of, from software or hardware compatibility perspectives.
@MBerk and @chemrat my iPad2 on iOs5 works flawlessly with Fiio E10 with:
1) External power supply Duracell Pocket charger ($20)
2) 4 port USB hub ($6) http://www.iogear.com/product/GUH285/
3) USB Y cable for external HD ($6)
http://www.walmart.com/ip/15172477?adid=22222222227000602779&wmlspartner...
And it sounds Amazingly sweet! Better than with my MBP.